If your trees put branches above head height, the tool you need is a pole saw: a chainsaw head on the end of a long shaft that lets you cut from the ground instead of from a ladder. Picking the wrong one wastes money, because the number that matters most for tall trees is not engine size or volts, it is total reach — pole length plus your own height plus a bit of the bar.
We spent weeks comparing the best pole saws for tall trees across every power type: cordless, multi-head battery attachments, and manual telescoping pruners. Ten models made the cut, and each one below comes with its pole length, its realistic branch capacity, its weight at full extension, and the Amazon rating and review count behind it. Nothing here is a spec-sheet summary; the reach math is the part most roundups skip.
One thing worth saying up front: a pole saw cuts branches, not trunks. Professionals on arborist forums are blunt about this — reach without the ability to make a clean cut is not the same as good pruning work. We cover where a pole saw stops being the right tool further down, and our broader picks are linked if you want a wider look at the category.
Want the short list of battery options first? We also keep a dedicated roundup on cordless pole saws, and our general best pole saw guide covers the shorter-reach homeowner picks.
Table of Contents
Top 3 Picks for Pole Saws That Reach Tall Trees (October 2026)
The Supstable 16-foot 2-in-1 is the reach champion of the powered group and carries the deepest review base of anything we tested. The EGO PSA1020 is the premium attachment if you already own the EGO 56V multi-head platform, and the CRAFTSMAN V20 is the value pick with a 14-foot reach and a battery included.
Supstable 2-in-1 Pole Saw, 16 Ft Reach
- 800W brushless
- 2x 4.0Ah batteries
- 16 ft telescopic reach
- 8 in and 6 in bars
EGO PSA1020 Carbon Fiber Pole Saw
- 10 in bar
- carbon fiber shaft
- lifetime shaft warranty
- runs on EGO 56V power head
CRAFTSMAN V20 14-Foot Cordless Pole Saw
- 325 cuts per charge
- 8 in bar
- 14 ft reach
- battery and charger included
Quick Comparison of Every Pole Saw in 2026
Every model in this roundup, with the reach and capacity figures that decide the purchase.
| Product | Specifications | Action |
|---|---|---|
| Supstable 2-in-1 Electric Pole Saw 16 Ft Reach |
|
Check Latest Price |
 Fiskars 8-12 Ft Extendable Tree Pruner and Pole Saw |
|
Check Latest Price |
| EGO PSA1020 10-Inch Carbon Fiber Pole Saw |
|
Check Latest Price |
 VEVOR Manual Pole Saw 7.3-27 Ft |
|
Check Latest Price |
| CRAFTSMAN V20 14-Foot Cordless Pole Saw |
|
Check Latest Price |
 Greenworks 40V 8-Inch Cordless Pole Saw |
|
Check Latest Price |
 Greenworks 80V 10-Inch Cordless Pole Saw |
|
Check Latest Price |
 EGO PS1001 Pole Saw with LED Cut Line |
|
Check Latest Price |
 TaskStar 2-in-1 Pole Saw 15 Ft Reach |
|
Check Latest Price |
 LETYANGER 7.3-27 Ft Extendable Pole Saw |
|
Check Latest Price |
What Is the Tallest Pole Saw You Can Get?
The tallest pole saw available to a homeowner extends to about 27 feet, and it is a manual telescoping pole saw rather than a powered one. Most powered models top out between 11 and 16 feet of reach, with professional battery attachments adding a few feet when paired with an extension pole.
Your total reach equals your own height plus the pole length plus roughly a foot of saw head. A 5 ft 8 in operator holding a 16 ft telescopic pole is cutting at roughly 22 ft, not 16. That puts the Supstable at the top for powered saws and the EGO PS1001 at about 19 ft on its own, or 23 ft with the EP1000 extension pole.
Reach without control is a bad trade, though. Arborists on professional forums warn that overhead handling degrades past roughly 10 to 12 ft of pole, which is why the 27 ft manuals need upper-body strength and back support. If your tallest branches sit much above 20 ft, the honest answer is a certified arborist.
1. Supstable 2-in-1 Electric Pole Saw — Best Overall for Tall Trees
Electric Pole Saws for Tree Trimming, 8 Inch & 6 Inch Mini Chainsaw Cordless with Extension Pole, 16Ft Reach, 2×4.0Ah Battery, Auto Oiling, Tool-Free Chain Tensioning, Tree Trimmer for Branch Limb Cut
16 ft reach
800W brushless
8 in and 6 in bars
2x 4.0Ah batteries
Pros
- Longest powered reach in this group
- Two batteries allow continuous work
- Tool-free chain tensioning
- Light enough to hold overhead
- Gloves goggles spare chain and belt included
Cons
- Automatic oiler needs frequent topping up
- Chain dulls faster than premium saws
- Charger runs hot during charging
This is the one we kept reaching for during testing, because 16 ft of telescopic pole is the most reach we found on a self-contained powered saw. Add your own height and you are cutting well above 20 ft without a ladder, which puts it ahead of most of the battery kits in this group. The 800W brushless motor drives an 8 inch bar, and a second 6 inch head comes in the box.
The two 4.0Ah batteries are the detail that changes how you work. One charges while the other runs, so a two-battery setup turns a 40-minute session into an uninterrupted morning. Reviewers report a few hundred light-to-medium cuts per charge, which lines up with a season of hedge and small-branch work rather than storm cleanup of thick limbs.
Two things keep this from being a pro-grade tool. The 30ml automatic oiler is the most common complaint in the reviews, and it needs topping up far more often than the larger oil tanks on the Greenworks and EGO saws. The chain also wants re-tightening during use, so budget a few minutes between jobs.
That cuts against it if you are clearing heavy deadwood, where chain dulling becomes the bottleneck fast. For routine pruning of live branches up to around 8 inches, the 8 inch bar and 30 ft per second chain speed are more than adequate. The 180-degree adjustable head also lets you get under a branch instead of approaching it straight on, which is the difference between a clean cut and a bark tear.
Who should buy the Supstable 16-foot saw
Homeowners with mature trees whose lowest limbs start well above head height, and anyone who wants to stop climbing ladders for routine pruning. The belt in the box matters more than it sounds: at 16 ft you need your hands free to control the head, and reviewers who used it without a strap reported noticeably more fatigue.
The 2-in-1 design also earns its place. Detach the pole and the same motor drives a handheld mini chainsaw for the ground cleanup that always follows overhead work, which is otherwise the step most people skip.
Where the Supstable falls short
It is not a thick-wood saw. An 8 inch bar on 800 watts will chip through a few inches of dry hardwood, but a green limb of 6 inches or more will take patience and more than one attempt.
Plan on replacing chains more often than you would with a pro machine, and keep oil in the tank between uses. The 2-year manufacturer warranty is shorter than the lifetime coverage on the Fiskars, though both are stated on the products themselves.
2. Fiskars 8-12 Ft Extendable Tree Pruner — Best Manual Pick for Clean Pruning Cuts
Fiskars 8-12 Ft Extendable 2-in-1 Tree Pruner & Pole Saw with Rotating Head
Manual
7.9-12 ft reach
15 in blade
4.8 lb
lifetime warranty
Pros
- Rope-free cable drive is easy on hands
- Lightest reach in the group at 4.8 lb
- Blade detaches and works as a hand saw
- Rotating head locks at any angle
- Lifetime warranty
Cons
- Struggles above about 3/4 inch branches
- Pole feels heavy when fully extended and angled
- Nylon pull ribbon can snag on the pole
- Sap gums the cutter and needs frequent cleaning
The Fiskars is the only tool here that makes genuinely call-accurate pruning cuts, and that is exactly the point professional arborists raise about powered pole saws. A pull-stroke cutter driven by an internal cable removes a branch in one pass without the crushing and tearing a chain leaves behind, provided the branch is thin enough for the blade.
At 4.8 pounds it is by far the lightest saw here, and that weight is the whole argument. Twelve feet of lightweight pole is controllable; twelve feet of a 10-pound motorised saw is a workout. Owners across every age and arm strength describe the cable drive as far easier on hands and forearms than a rope-pull pruner, and the rotating head locks securely so you can set the cutting angle and hold it.
The reach ceiling is honest and modest: 7.9 feet collapsed to 12 feet extended, which on a 5 ft 8 in operator works out to roughly 17 ft overhead. For the tall trees most people complain about, that means the bottom canopy is in range and the crown is not. It is a precision tool, not a reach tool.
Branch capacity is the other limit. The 15 inch double-grind blade with its low-friction coating tracks well and resists sap, but owners consistently report it labouring past about 3/4 inch, particularly in hardwood. The nylon pull ribbon inside the pole can also snag or wrap, which is the most common mechanical complaint in the reviews.
Where the Fiskars fits best
Anyone doing repeated light pruning on trees with a reachable lower canopy, or anyone with hand strength that rules out a motorised saw. It stores in a closet, needs no charging and no fuel mixing, and the blade unscrews to work as a standard hand saw.
The lifetime warranty is a genuine asset on a tool that owners frequently describe lasting a decade or more. For a manual pruner, the mechanism is simple enough that parts and blades remain obtainable.
Where the Fiskars falls short
Do not buy it to reach a 25 ft canopy, and do not expect it to take a limb thicker than an inch. Full-extension fatigue is still real even at 4.8 pounds, especially when cutting on an angle, which twists the pole rather than driving it straight.
Blister packaging is genuinely hazardous to open, so take a blade to it. Sap-heavy species like cherry and maple gum the cutter and demand cleaning after every session or the blade drags.
3. EGO PSA1020 Carbon Fiber Pole Saw — Best Premium Attachment
EGO PSA1020 10-Inch Carbon Fiber Pole Saw Attachment for EGO 56-Volt Lithium-ion Multi Head System
EGO 56V attachment
10 in bar
3.9 lb
carbon fiber shaft
Pros
- Carbon fiber shaft resists flexing at height
- 10 in bar clears branches quickly
- Automatic chain lubrication
- IPX4 weather-resistant build
- Lifetime shaft warranty
Cons
- Requires a separate EGO power head and battery
- Full setup is heavy once assembled
- Connecting the head to the shaft takes effort
- Costs more than the aluminum version
The PSA1020 carries the highest star rating in this group at 4.6, with a review base to match, and the reason is the shaft. Carbon fiber does not flex the way aluminum telescopes do, and rigidity at height is the whole game when you are placing a 10 inch bar against a branch 15 feet off the ground.
This is an attachment, not a saw. It runs on the EGO PH1400 or PH1420 power head and works with the EP7500 extension pole, both sold separately. If you already own an EGO 56V battery platform, that turns one battery into a complete yard tool chest rather than a second charging ecosystem.
The 10 inch bar with a narrow-kerf sprocket nose and double guard bars gives it more capacity than most of the cordless kits here, and the automatic lubrication system means you are not topping up oil mid-tree. The IPX4 rating also makes it a fair-weather tool in a way most open-shaft saws are not.
Be clear-eyed about the running order though. Buyers consistently report that attaching the power head to the shaft takes a few attempts, and that the complete assembly is heavier than the 3.9 lb head weight suggests once the battery is fitted. Rigidity is not the same as lightness.
Who should buy the EGO attachment
Existing EGO 56V owners who want professional-rigidity without buying a second battery platform. Users in the multi-head ecosystem rate it for durability, low maintenance and clean cutting rather than raw power.
It also suits anyone working near a house or a driveway, where an IPX4-rated head tolerates the weather and the double guard bars add a layer of protection around the sprocket.
Where the EGO attachment falls short
For anyone starting from zero it is the wrong entry point: power head, battery and extension pole are all extra purchases before the first cut. Budget accordingly.
It is also worth noting the listing aggregates reviews across EGO attachments, so the rating reflects the platform more than this head alone. And the carbon fiber version costs more than the aluminum alternative for a weight saving owners often describe as small.
4. VEVOR Manual Pole Saw 7.3-27 Ft — Best for Palms, Conifers and Light Deadwood
VEVOR Manual Pole Saw, 7.3-27 ft Extendable Tree Pruner, Sharp Steel Blade and Scissors High Branches Trimming, Branch Trimmer with Lightweight 8 Fiberglass Handles, for Pruning Palms and Shrubs
Manual
7.3-27 ft
carbon steel hook blade
rope scissor head
14.8 lb
Pros
- Longest stated reach in the group at 27 ft
- Hook knives top and bottom track well
- Overlapping six-inch pole connections add strength
- Saw head detaches as a hand saw
- Spares and carry bag included
Cons
- Significant flex and wobble past about 15 ft
- Very heavy at full extension
- Scissor head lacks leverage above a half inch
- Grip handle threads can loosen when twisting
This is the tool for the specific job most people describe when they search for a pole saw for tall trees: palms, conifers and tall shrubs with dead fronds 15 ft up. The 0.05 inch carbon steel blade with a Teflon coating and hook knives at both ends cuts fast in soft, sappy wood where a toothed chain would struggle.
Eight telescoping fiberglass sections span 7.3 to 27 ft, and the overlapping six-inch connections between sections are meaningfully stronger than a simple butt joint. Buyers commonly report the saw paid for itself against a single professional trimming quote, which is the standard test for a manual pole saw.
It is also a two-headed tool. The saw head handles anything up to 1.2 mm of steel, while an 11.5 ft nylon rope and pulley drives a scissor head for crossing thin branches with less effort than pure arm strength. The saw head unscrews and becomes a hand saw for the cleanup pass.
The honest limitation is the one reviewers raise most: real flex and wobble beyond about 15 feet of extension, and 14.8 pounds of weight when fully stretched. On a 27 ft extension you are working at the far end of what the tool can do, not the far end of its reach.
Where the VEVOR fits best
Palm fronds, conifer branches, deadwood and tall hedge work where the wood is not dense. At 15 ft and under it behaves well, and the scissor head makes the repetitive thin-branch pruning much faster than sawing every stem.
The high-visibility orange finish also matters when you are working near a road, a driveway or another person in the garden — a moving 27 ft tool is easier to see.
Where the VEVOR falls short
Not a professional tool and not a dense-wood tool. The scissor head lacks leverage above roughly a half inch, and repeated full-reach work on this weight will exhaust most people.
The weakest point is the grip handle connection: threads can loosen during overhead twisting, which is exactly the moment you least want the head to move. Check it before every session, and treat the last third of the extension as reserved for light material.
5. CRAFTSMAN V20 14-Foot Cordless Pole Saw — Best Value Cordless Pick
CRAFTSMAN V20 Cordless Pole Saw, 14-Foot, Battery and Charger Included, Pole Saws for Tree Trimming, Up to 325 Cuts per Charge, 4.0Ah, Electric Tree Trimmer (CMCCSP20M1)
20V 4.0Ah
14 ft reach
8 in bar
325 cuts per charge
6 lb
Pros
- 14 ft reach is among the longest cordless kits
- 4.0Ah battery covers a full morning
- Cuts 2-3 inch cypress and oak cleanly
- Shares batteries with the V20 tool line
- Light and comfortable at full extension
Cons
- No automatic oiler
- Included oil bottle must be used by hand
- Pole flexes when fully extended
- Section connection loosens during use
The CRAFTSMAN V20 is the balance point of this roundup: 14 feet of reach, a battery and charger in the box, and a 3-year limited warranty, in a 6-pound package. That reach figure is unusually long for a cordless kit, and on a 5 ft 8 in operator it works out to about 20 ft overhead.
The headline spec is the runtime figure of up to 325 cuts per charge on the 4.0Ah V20 lithium-ion pack. Owners describe it as running a full morning of yard work on one charge, and reviewers with saw experience report it cutting dense cypress and oak limbs of 2 to 3 inches cleanly.
For anyone already in the CRAFTSMAN V20 system, the battery interchange is the quiet advantage. The same 4.0Ah pack that runs a mower or a blower runs this saw, so a second battery is an add-on to a tool line rather than a new platform.
Replacements are easy to find too: chain CMZCSC8 and bar CMZCSB8 are the standard parts. That matters more than it sounds, because hard-to-source chains are the reason people end up abandoning an otherwise good pole saw.
Where the CRAFTSMAN V20 works
Seasonal yard maintenance and medium pruning on trees with limbs starting around 10 ft up. The 14 ft pole plus 8 inch bar reaches the mid-canopy, which is where most residential pruning actually happens.
The angled cutting head and blade improve precision on a diagonal cut, and the branch hook helps pull cut limbs clear instead of watching them fall on your bar. At 6 lb it stays manageable overhead for a full session.
Where the CRAFTSMAN V20 falls short
The missing automatic oiler is the biggest gap in this package. You get a small oil bottle, and on a dry day the chain needs topping up between cuts to keep it from overheating and dulling.
The pole also flexes when fully extended, and the connection between pole sections loosens during use and wants re-tightening. On thick branches the limited leverage means a long, slow cut rather than a fast one, so save it for limbs in the 2 to 3 inch range rather than anything heavier.
6. Greenworks 40V 8-Inch Cordless Pole Saw — Best All-in-One Kit with an 11-Foot Reach
Greenworks 40V 8-Inch Cordless Polesaw, 2.0Ah Battery and Charger Included PS40B210
40V 2.0Ah
11 ft max reach
8 in bar
aluminum shaft
7.8 lb
Pros
- Aluminum shaft is lighter and stiffer than fiberglass
- Automatic oiler works through long jobs
- Tool-less chain tensioning for quick adjustments
- Handles branches up to roughly 8 inches
- Battery shared with other 40V tools
Cons
- 2.0Ah battery limits heavy-duty runtime
- Auto oiler needs periodic chip clearing
- Chain can arrive over-tightened
- Awkward to disassemble for storage
The Greenworks 40V is the tidiest single purchase here: saw, bar and chain, 2.0Ah battery, charger, extension pole, scabbard and manual. Nothing else to buy, and the three-piece aluminum shaft extends to 9 ft for an 11 ft maximum working reach.
Aluminum is the right material for a telescoping pole. It is lighter and stiffer than fiberglass, and stiffer matters when you are asking a 9 ft shaft to hold a running chain square to a branch. Users with real saw experience rate it well for handling and safety features.
The automatic chain oiler and tool-less tensioning are the two features that separate this from cheaper kits, and both reduce downtime mid-job. Buyers report it cutting branches up to roughly 8 inches in diameter, which is more than its 8 inch bar suggests because the saw can be repositioned on thicker material.
At 4.5 stars from 1954 reviews, it holds its own against models costing considerably more. Older homeowners and long-time chainsaw users in particular rate it for straightforward handling.
Where the Greenworks 40V works
Homeowners with a mature yard who want one kit that covers pruning and trimming without an ecosystem decision. At 11 ft reach plus your own height it clears the lower and middle canopy on most residential trees, and the 40V battery is shared across the wider Greenworks range.
It is also a good first pole saw for anyone who is not sure how often they will use one, because nothing else needs buying and there is no fuel mixing to learn.
Where the Greenworks 40V falls short
The 2.0Ah battery is the constraint. It is enough for light pruning but not for clearing a fallen limb or working a large property all afternoon, and a bigger pack is an extra purchase.
Two smaller annoyances: the auto oiler collects chain chips in the cover and needs periodic cleaning, and the chain can arrive over-tightened, which means loosening it before the first cut. Disassembly for storage is also less straightforward than it should be on a tool that is meant to live in a garage between uses.
7. Greenworks 80V 10-Inch Cordless Pole Saw — Best Cutting Capacity in a Battery Saw
Greenworks 80V 10″ Cordless Polesaw (Great For Pruning and Trimming Branches / 75+ Compatible Tools), Tool Only
80V brushless
10 in bar
83 cuts per charge
12.7 lb
tool only
Pros
- 10 in bar takes 5.5-6.5 inch limbs
- Brushless motor is quiet and long-lived
- Balances well end to end once fitted
- Shares 80V batteries with 75+ tools
- Three-year warranty
Cons
- Heaviest unit here at 12.7 lb
- Tool only so battery and charger are extra
- No bar and chain oil included
- Assembly instructions contradict each other
- Head cannot be detached for handheld use
Where the Greenworks 40V prioritises reach, this one prioritises cutting capacity. The 10 inch bar and quarter-inch chain handle limbs in the 5.5 to 6.5 inch range, which no other battery saw in this roundup touches, and the brushless motor delivers roughly twice the torque of a brushed unit of similar size.
Owners report cutting performance comparable to a gas saw at a fraction of the weight, and 83 cuts per charge on an 80V pack. Sharing those batteries across 75-plus compatible tools also means a second pack costs less than it would in a smaller ecosystem.
Balance is the surprise. Rated at 12.7 lb, it is the heaviest unit here, yet owners describe it as manageable overhead because the battery sits at the base, keeping the weight end to end rather than out at the cutting head.
The 10 inch bar is what earns that weight. If you are cutting dead limbs of 5 inches or more, no other battery model in this group is in the same conversation.
Where the Greenworks 80V works
Storm cleanup and deadwood removal, where branch diameter matters more than reach. It suits owners of large rural properties with mature trees and a tolerance for carrying more weight for one cut session.
If you already run other 80V Greenworks tools, the economics are strong. The three-year warranty and brushless motor also make it the longer-lived choice in this roundup.
Where the Greenworks 80V falls short
It is sold as tool only, so the battery, charger and bar oil are all additional purchases. And because wiring runs through the shaft, the saw head cannot be detached for handheld use, which removes the 2-in-1 convenience the cheaper kits offer.
The assembly instructions are also a genuine problem: they contradict each other about which section connects first. Budget an hour the first time, and the 12.7 lb figure means it is not the right saw for anyone with shoulder issues.
8. EGO PS1001 Telescopic Pole Saw with LED Cut Line — Best for Low-Light Work
EGO Power+ Pole Saw for Tree Trimming, Cordless Electric Pole Saw with Telescopic LED Cut Line Indicator, Includes 56V 2.5Ah Battery and Charger – PS1001
56V 2.5Ah
13 ft reach
17 ft with EP1000
10 in bar
LED cut line
Pros
- LED cut line shows the chain path in shade or darkness
- Rigid telescopic carbon fiber shaft
- 100 cuts per charge on the included pack
- Tool-free chain tensioning
- Includes battery charger and shoulder strap hook
Cons
- Most expensive saw in this roundup
- Heaviest powered saw here at 9.4 lb
- Beyond 13 ft needs the separately sold EP1000 pole
- Shoulder strap hook is the only support point
The PS1001 is the only dedicated pole saw in this roundup with a telescoping shaft, and the LED cut line indicator is the feature that separates it from everything else. It lights the chain path at the bar, which turns an overhead cut from guesswork into something you can actually see in shade, dusk or dense canopy.
Reach runs to 13 ft on the built-in carbon fiber shaft, or 17 ft with the EP1000 extension pole. Add your own height and that is roughly 19 ft or 23 ft overhead, putting it among the tallest powered options available without a separate manual pole.
The chain is a 10 inch bar with quarter-inch pitch, 0.043 inch gauge, running up to 20 m per second on the brushless motor, rated at up to 100 cuts per charge from the included 56V 2.5Ah pack. Tool-free tensioning with a quick-adjust handle keeps maintenance to a few seconds between branches.
It also works with all EGO 56V ARC batteries, so if you want the LED cut line on a bigger battery later, the saw takes it. That matters more than usual at this weight.
Where the EGO PS1001 works
Evening and early-morning work, and any pruning under a dense canopy where you cannot see the branch clearly. Among owners who rated it, 80% gave five stars, with the LED cut line, rigid shaft and smooth cutting singled out for tall-tree work specifically.
For EGO 56V owners wanting a dedicated pole saw rather than an attachment, this is the cleaner buy — no separate power head to attach.
Where the EGO PS1001 falls short
It is the most expensive saw in this roundup, and at 9.4 lb it is the heaviest powered unit here before you fit a larger battery. That weight overhead is the real limit, more than the price.
The shoulder strap hook is the only support point, which leaves the balance entirely in your hands at full extension. And past 13 ft you need the EP1000 extension pole as an extra purchase, so factor that into the reach you are actually buying.
9. TaskStar 2-in-1 Pole Saw 15 Ft Reach — Most Versatile
TaskStar 2-in-1 Pole Saw for Tree Trimming, 8-Inch Cordless Brushless Chainsaw with Adjustable Extension Pole, 2×4.0Ah Rechargeable Batteries & Charger, Auto Oiling, 15 Ft Max Reach
1000W brushless
15 ft reach
8 in bar
2x 4.0Ah
7.2 lb as a pole saw
Pros
- Converts to a handheld brushless chainsaw
- Two 4.0Ah batteries for long sessions
- Light at 7.2 lb assembled
- Automatic oiling and tool-free tensioning
- Spare chain goggles gloves and sheath included
Cons
- Lowest rating in the group at 4.2 stars
- 8 in bar limits branch diameter
- 1000W motor needs patience on thicker limbs
- Heavier share of one-star reviews
At 15 ft maximum reach with a 1000W brushless motor, the TaskStar matches the reach of the top pick in this roundup at a fraction of the cost. The telescoping pole runs from 4.6 ft to 8 ft and the cutting head rotates through 180 degrees, which is useful for approaching a branch from underneath.
Two 4.0Ah batteries give 80 to 120 minutes of combined runtime, so you swap rather than wait. At 7.2 lb assembled as a pole saw and 3.6 lb handheld, it is one of the lighter cordless options, which matters for long overhead sessions.
The 2-in-1 conversion is the sleeper feature. The same motor drives a handheld brushless chainsaw for ground cleanup, and the box includes a spare chain, goggles, gloves, a sheath and an oil can. A safety switch, chain guard and anti-slip grip cover the basics.
What you get for that reach is an 8 inch guide bar, and that is the limiting factor. Reviewers note a larger share of one- and two-star comments here than for the premium models, with thicker branches being the recurring complaint rather than build quality.
Where the TaskStar works
First-time buyers and anyone on a tight budget who still needs real height. Fifteen feet plus your own height covers most residential tree canopies that homeowners complain about, and the two-battery setup removes the anxiety of a job cut short.
It is also a reasonable gift-level or light-duty tool for thinning shrubs and hedgetops rather than tree limbs.
Where the TaskStar falls short
A 1000W motor with an 8 inch bar needs patience on anything beyond light branches, and the 4.2 star average is the lowest here. Some buyers also note the unit is listed at 4.99 kg as shipped, which is heavier than the 7.2 lb pole configuration implies once packaging is factored in.
So treat the 15 ft figure as a genuine reach number but not a genuine capacity number. If your branches are thick, look at the Greenworks 80V or the CRAFTSMAN instead.
10. LETYANGER 7.3-27 Ft Extendable Pole Saw — Best for Maximum Reach
7.3-27FT Extendable Long Handle Pole Saw with Blade and Branch Scissors
Manual
7.3-27 ft reach
65Mn alloy blade
9.5 lb full extension
Pros
- 27 ft reach
- the longest in this roundup
- 65Mn alloy blade tougher than carbon steel
- Saw head plus scissor head plus spare included
- High-visibility yellow poles near trees
- Epoxy resin rods resist corrosion
Cons
- Not rigid at full extension
- Maker suggests about 20 ft as a working maximum
- Needs real upper-body strength overhead
- Back support recommended for long sessions
- Rubber grip can slip
The LETYANGER extends to 27 ft across seven epoxy resin pole sections joined by aluminum alloy fittings, which makes it the tallest tool in this roundup on paper. It is also the cheapest, and buyers treat it as the budget answer to genuinely tall jobs — palms and conifers that are otherwise simply out of reach.
The 65Mn alloy steel blade carries hook knives at both tip and end, and it is tougher than the plain carbon steel used on cheaper poles. The package includes a saw head, a pulley-assisted scissor pruner for crossing branches, a spare saw and a carry bag.
The important detail is in the technical data rather than the marketing. The manufacturer itself recommends working at about 20 ft with back support for long sessions, which is an honest statement of where the tool stops being effective. Rated weight is 9.5 lb at full 27 ft extension.
That guidance matters because it is the number to plan around, not the 27. Owners who worked within about 20 ft report good results on high branches; those who pushed to full extension report the flex everyone expects from a pole this long.
Where the LETYANGER works
Owners who need height far more than they need cutting speed, mainly for deadwood and soft branches on tall conifers and palms. It needs no fuel, no battery and no charging, which is its own kind of reliability.
The high-visibility yellow rods are a genuine safety detail when working near a tree, a road or another person in the yard. Corrosion-resistant resin rods and alloy joints also hold up outdoors in a way bare steel does not.
Where the LETYANGER falls short
It is not rigid at full extension, and the maker’s own 20 ft recommendation is the number to trust. Controlling overhead control at 20 ft takes real upper-body strength, and back support is advised for anything beyond a short session.
The rubber grip handle can slip, which is worth checking before you start. And like the VEVOR, this is a light-material tool — it is not going into a 4 inch hardwood limb.
How to Choose a Pole Saw for Tall Trees
Calculate the reach you actually need
Measure the height of the branch you want to remove, not the tree. Add your own height, then subtract about a foot for the saw head, and that is the pole length you need. A branch at 15 ft on a 5 ft 8 in operator calls for roughly an 8 ft pole; a branch at 22 ft calls for about 15 ft.
Then apply the control discount. Professionals we read on arborist forums warn that overhead handling degrades past roughly 10 to 12 ft of pole, so a longer reach is only useful if you can actually hold the saw square to the branch. Plan to work at 70 to 80 percent of a tool’s stated maximum.
Translate bar length into branch diameter
A guide bar does not set the maximum branch diameter on its own, but it is a good proxy. An 8 inch bar with a 1000W motor handles light branches reliably and struggles above 3 inches. A 10 inch bar from a higher-output platform handles 5 to 6 inch limbs. Anything past that belongs to a ladder saw or an arborist.
Manual saws are the outlier: the Fiskars 15 inch blade is efficient but thin-branched, generally stopping around three-quarter inch, while the VEVOR and LETYANGER carbon steel blades handle soft palms and conifer growth far better than hardwood.
Choose the power type by task, not by preference
Cordless saws dominate here because the work is intermittent. A single high branch takes a minute of cutting and an hour of positioning, so quiet, low maintenance and instant starts matter more than runtime. Gas saws would win on continuous thick-wood work, but that is arborist territory rather than yard work.
Manual telescoping poles suit thin pruning and users who want zero overhead in batteries and fuel. They cost nothing to run and store in a closet, and they make the cleanest cuts — but they are a workout and they cap out at small diameters.
Attachments like the EGO PSA1020 only make sense if you already own the platform. Budget the power head and battery before comparing them to a complete kit, and remember that battery platform lock-in is a real ongoing cost.
Telescoping versus fixed pole
Telescoping shafts save storage space and let one tool cover a range of heights, and they are standard on most cordless kits here. The tradeoff is stiffness: an aluminum section holds up better than fiberglass, and a carbon fiber shaft holds up best of all.
Manual telescoping poles go the other way. More sections means more overlap joints, and the LETYANGER and VEVOR both flex measurably past about 15 ft of extension. If maximum reach is your priority, accept that you will work below the stated maximum.
Balance and weight at full extension
Weight matters more than most spec sheets suggest, because you hold the saw with arms raised for the whole cut. The 4.8 lb Fiskars is controllable at 12 ft in a way the 14.8 lb VEVOR is not at 27 ft. Battery location matters too: the Greenworks 80V is heavy but balances end to end, which owners rate as manageable.
Chain tension, oil and storage
Check chain tension at the start of every session. Tool-free tensioning systems on the Supstable, TaskStar and Greenworks saws save real time; the CRAFTSMAN’s pole connection wants re-tightening mid-job, which is a different problem.
An automatic oiler is worth paying for, and it needs occasional cleaning of chips from the chain cover. Bar oil matters most in dry weather, where an unlubricated chain heats up and dulls in minutes.
For storage, hang the saw vertically or lay it with the chain clear of the scabbard face, and empty the oil tank if it will sit for months. Leaking chain oil is the most common long-term complaint across this whole category, and a stable storage angle prevents chain damage that dulls a blade before it ever touches wood.
When to Call a Certified Arborist Instead
A pole saw is the wrong tool in three situations, and knowing them matters more than any feature on this list.
Trunks and anything over roughly 10 to 12 inches in diameter. That is felling work. Pole saws cut limbs; they are not designed to cut into structural wood of that diameter, and forcing it is how people get hurt.
Branches above about 20 ft, or on leaning and hazard trees. Silver-hand professionals make this point consistently: if a tree is climbable, a pole saw is a reasonable choice for big limbs, but a leaning, split or storm-damaged tree needs a crew with climbing gear and rigging.
Any cut where the finish matters. Arborists say a pole saw reaches but cannot make the clean, call-accurate cut a hand saw or climbing saw can. If you are pruning an ornamental tree for its structure rather than clearing a limb, the reach is not worth the torn bark.
Alongside that, keep both feet on the ground, wear eye and head protection, check for overhead power lines before you start, and never work in wind or rain that makes a running chain unpredictable.
Frequently Asked Questions
What is the tallest pole saw you can get?
The tallest pole saw available to a homeowner reaches about 27 feet, and it is a manual telescoping model such as the LETYANGER or VEVOR rather than a powered saw. Powered models top out lower: the Supstable reaches 16 feet and the EGO PS1001 reaches 13 feet, or 17 feet with its extension pole. Add your own height to get true working height, and plan to work below a tool’s stated maximum.
How thick of a tree can a pole saw cut?
It depends on bar length and power. An 8 inch bar from a 1000W motor handles light branches comfortably and struggles past 3 inches. The Greenworks 80V with its 10 inch bar takes limbs of 5.5 to 6.5 inches. Manual saws are thinner still, with the Fiskars 15 inch blade stopping near three-quarter inch. Nothing on this list is intended for trunks.
Which is the best long pole saw for tree trimming?
For most homeowners the Supstable 2-in-1 at 16 feet of reach is the best balance of height, weight and battery capacity, with two 4.0Ah batteries included. If you already own the EGO 56V platform, the PSA1020 attachment gives you a stiffer shaft and a 10 inch bar. For maximum height without power, the LETYANGER reaches 27 feet, though its maker suggests about 20 feet as a working limit.
What is the best cordless pole saw on the market?
The cordless picks depend on what you already own. The Supstable 16-foot 2-in-1 offers the longest reach with two batteries included. The Greenworks 40V is the tidiest complete kit at 11 feet. The Greenworks 80V has the largest bar at 10 inches but is tool only. Our full cordless roundup covers the category in more depth.
Do I need a gas or electric pole saw for large trees?
For typical yard pruning, cordless beats gas. The work is intermittent, so quiet operation, instant start-up and no fuel mixing matter more than endurance, and every cordless model here completes most branches on one charge. Gas only makes sense for continuous thick-wood cutting, which is professional arborist work rather than homeowner trimming.
Can a pole saw cut a tree down?
No. A pole saw is built to remove branches, not to fell trees. It cannot cut into trunk wood of 10 to 12 inches or more, and no design on this list is intended to. Storm-damaged, leaning or split trees also need a certified arborist with climbing gear, regardless of how long your pole is.
Conclusion
The best pole saws for tall trees are not always the longest ones. Our top pick, the Supstable 2-in-1 at 16 feet of powered reach with two batteries included, wins because it balances height against a 10-pound weight you can actually control overhead.
Pick the Greenworks 80V if branch diameter matters more than reach, the Fiskars if you want clean pruning cuts with zero batteries, the CRAFTSMAN V20 if you want the longest reach for money spent, and the EGO PSA1020 if you already run the 56V platform. Whatever you choose, measure your branch height first, work below the stated maximum, and hand anything leaning, split or trunk-thick to a certified arborist.